Platypod Pro® Single Plate

The Platypod ProTMis constructed of a 4mm thick plate of aircraft grade aluminum measuring 3"x5". Solidly welded through this base is a 3/8 inch titanium screw to accommodate most professional tripod ball heads. This allows one to attach the plate to the ballhead by simply rotating either one, tool-free. Bolt placement is ideally balanced to allow mounting of a pro tripod head. This will easily accommodate professional DSLRs such as a Nikon D810 or a Canon EOS 5D Mark III with a 24-70mm f/2.8 lens. Large telephoto lenses can be used as well but mounting with the tripod collar ring of such a lens is recommended. Attachment to a piece of 3/4" plywood with common wood-screws will support even the largest sports lenses! A second, 1/4" titanium screw is attached at the other end of the plate to allow placement of smaller devices such as a video mike, transmitter, flash accessory shoe, etc. There are three threaded holes in the plate to optionally attach small spike/screws with small rubber caps allowing the photographer to balance the plate sturdily on an uneven surface such as a boulder. The plate also has four un-threaded holes to allow permanent or semi-permanent attachment of the plate to any wood plank, table, wall or ceiling. In fact, the Platypod ProTM can used as a base for any device with a 3/8" or ¼" tripod type threaded hole. This includes/umbrella brackets, Smartphone/tablet supports and professional microphones using the appropriate adapters.Go to www.platypodpro.com for further details.

from Consumer Electronics Store http://cestore.net/camera-photo/tripods-monopods/tripod-legs/Platypod-Pro-Pro%C2%AE-Single-Plate.html?pid=B01B3XNFOA